Lorawan Parameters - Infinite AERINOS ADS-270 User Manual

4.7 LORAWAN Parameters

4.7.1 Device Address
The command sets the unique device address.
9410,s
s: 00000000-FFFFFFFF, 4-byte hexadecimal number representing the device
address, from
4.7.2 Device EUI
The command sets the globally unique device address.
9420,s
s: 8-byte hexadecimal number representing globally unique device identifier (EUI).
The parameter is internally set. It is recommended not to change this value.
4.7.3 Set Application EUI
The command sets the Application identifier.
9430,s
s: 8-byte hexadecimal number representing the Application EUI.
4.7.4 Set the Network Session Key
The command sets the Network Session Key.
9440,s
s: 16-byte hexadecimal number representing the network session key.
4.7.5 Set the Network Application Key
The command sets the Network Session Key.
9450,s
s: 16-byte hexadecimal number representing the network application key.
4.7.6 Set LoRa Data Rate
The command sets the LoRa Data Rate.
9460,n
n: 0-7, decimal number representing the data rate.
4.7.7 Set uplink frame counter
The command presets the uplink frame counter.
9470,c
c: 0 - 4294967295, decimal number representing the value of the uplink frame
counter that will be used for the next uplink transmission.
4.7.8 Set Power Index
The command sets the LoRa Power Index.
9480,p
p: 1-5, decimal number representing the power index.
ADS-270 User Guide 17