Assembly
1
Assembling the wheels
□ With the offset hub of a wheel (A) facing the tank's wheel
bracket, assemble a 10 mm shoulder bolt (AA) through the
holes in the wheel and tank wheel bracket.
□ Place a lock washer (CC) onto the threaded end of the
shoulder bolt (AA). Then, place a 10 mm nut (BB) on the
threaded end of the bolt (AA) and tighten securely.
□ Repeat for the other wheel (A).
BB CC
3
Attaching the air filter
□ Insert the threaded end of the air filter (M) into the threaded
port of the pump head. Do not apply thread tape to the air
filter assembly's threads.
□ Rotate clockwise to tighten. Hand tighten only.
AA
A
8
2
Assembling the handle
□ Insert the two open ends of the handle (F) into the handle
brackets on the air compressor tank.
□ Align the holes in the handle bracket with the threaded
holes in the handle (F).
□ Attach the handle (F) to both sides of the air compressor
using washer Φ10 (DD).
Tighten securely.
F
DD
M