Swann SwannSecure NVW-470 Quick Start Manual page 6

C Tap the Key field, and enter the password for your Wi-Fi
network.
You can sync Wi-Fi network settings to additional
cameras by connecting one camera at a time with the
Ethernet cable. The SwannSecure Wi-Fi Monitoring
System lets you connect up to 4 cameras in total.
Unplugging the Ethernet cable will cause the devices
to lose connection for a few seconds. It's okay - they
will reconnect to your Wi-Fi network automatically. The
icon appears next to the battery icon on the screen
when the Monitor is connected to your Wi-Fi network.
On the on-screen keyboard, you can toggle between
lowercase and uppercase characters, and numbers by
tapping .
D
Tap Sync.
Select the camera and then tap Sync to copy Wi-Fi network
E
settings to the camera. When the confirmation message
appears, tap OK to close the message.
F
Unplug the Ethernet cable from the camera and Monitor, and
then tap Finish.