Subscribe to Our Youtube Channel
Related Manuals for Swann MR4K
Summary of Contents for Swann MR4K
- Page 1 Wireless Long Range Camera For MaxRanger4K™ Solar Wireless Security System Instruction Manual...
- Page 2 Introduction Congratulations on the purchase of your Swann Do not operate if wires and terminals are exposed. Wireless Long Range Camera. Important Note: All jurisdictions have specific laws • 4K Ultra HD video from Sony Starvis sensors and regulations relating to the use of cameras. Be-...
-
Page 3: Charging The Battery
Charging the Battery Charge the battery for three to four hours using the USB-C cable provided (USB power adapter not included). When mounted, the camera’s solar panel will charge the battery. Connect the supplied antenna to TYPE-C OFF ON the camera’s antenna connection. Turn the antenna base clockwise to connect (make sure it’s firm, but don’t overtighten). -
Page 4: Pairing The Camera
Pairing the Camera Channel 2 31/10/2023 17:11:17 PM Press the pair button to Channel 3 Channel 4 31/10/2023 17:11:17 PM 31/10/2023 17:11:17 PM commence pairing. In Live View mode, click a channel to pair the camera to. A pair button appears (a blue pair button may also appear in the top-right hand corner of each channel). Press this button to commence pairing. -
Page 5: Mounting The Camera
Mounting the Camera Securely attach the camera to a level surface using the included screws and wall plugs. En- sure that the surface is sturdy enough. Place the mounting plate in the desired lo- cation. Then, fasten the mounting plate in po- sition using the suitable screws for the surface you are attaching it to. - Page 6 Camera Location Tips Take into consideration what you want to monitor ter¬est as practicable. The best position is from and where you’ll get the best view of it. about 13ft/4m above looking slightly down, keeping in mind the details you are looking for. The amount of energy the camera’s solar panel can produce depends on several factors: average Make sure your camera has minimal sky in it as...
- Page 7 Helpdesk & Resources Visit Swann Support Center at support.swann.com. You can register your product for dedicated customer support, download guides, find answers to commonly asked questions, and more. Support Community Customer Support Product Manuals Frequently Asked Questions MNVWMR4KCAMREV1E | © Swann 2024...
Need help?
Do you have a question about the MR4K and is the answer not in the manual?
Questions and answers
how do you turn off the red blue flashing lights?
To turn off the red and blue flashing lights on the Swann MR4K, complete the pairing process. The lights indicate the camera is in pairing mode and will stop flashing once the camera is successfully paired. If pairing fails, repeat the pairing instructions.
This answer is automatically generated
Can I change the battery on a wireless 4K and if so how
The Swann MR4K Wireless 4K Camera has a rechargeable lithium-ion battery that is kept charged by an integrated solar panel. The manual does not mention replacing the battery, only charging it via a USB-C connection if needed. Therefore, the battery is rechargeable but not explicitly stated to be user-replaceable.
This answer is automatically generated
It would appear my camera battery is faulty, it wont charge up , it worked for approximately 3 months then slowly stopped working , how do i get a replacement