Accessory Carriage Attachments; Installing Accessory Carriage Attachments - Vestil PEL-Series Instruction Manual

Rev. 10/3/2019

Accessory carriage attachments:

The following carriage attachments can be purchased separately and replace the standard load deck when installed.
See "Installing accessory carriage attachments" on page 11 for installation instructions.
PEL-DSPIN
Weight = 20 lb.
Capacity:
PEL-88 & PEL-88-A = 175 lb.
PEL-100 & PEL-100-A = 125 lb.
PEL-400-57/72 = 400 lb.
PEL-SPIN
Weight = 11 lb.
Capacity:
PEL-88 & PEL-88-A = 175 lb.
PEL-100 & PEL-100-A = 125 lb.
PEL-400-57/72 = 400 lb.

Installing accessory carriage attachments:

Each attachment (except PEL-VBLK) includes a carriage mounting plate with 8 bolt holes as shown in the diagram below.
Use the wider bolt pattern (see red rectangle) to mount your attachment to the carriage of any steel quick lift. To mount an
attachment to an aluminum quick lift, use the narrow bolt pattern (shaded blue).
3
Step 1: Remove the / " – 16 x 1
8
to the carriage.
Bolt
Step 2: Fasten the mounting plate of your attachment to the carriage
using the hardware removed during step 1. The correct top-to-bottom
orientation of each attachment is indicated in the "Accessory carriage
attachments" section above.
Installing attachment PEL-VBLK:
1. Disconnect the deck
from the carriage
arms by removing
the 10-32 x 1" flat
head bolts.
2. Center the
attachment on the
arms and align bolt
holes in the VBLK
with the bolt holes in
the carriage arms.
Use the bolts to
fasten the VBLK
attachment to the
carriage arms.
Copyright 2018 Vestil Manufacturing Corp.
PEL-HOOK
Weight
Capacity:
PEL-88 & PEL-88-A
PEL-100 & PEL-100-A = 125 lb.
PEL-400-57/72
PEL-RR
PEL-PAIL
Weight = 40 lb.
Weight
Capacity = 125 lb.
Capacity
1
/ " bolts that fasten the deck
2
Carriage
Bolt
= 9 lb.
= 175 lb.
= 400 lb.
PEL-VBLK
Weight
Capacity:
PEL-88; PEL-88-A
PEL-100; PEL-100-A = 125 lb.
PEL-400-57/72
= 20 lb.
= 125 lb.
Attachment (PEL-RR shown):
Mounting
plate
Dimensions of mounting plate:
Bottom side of
PEL-VBLK
Carriage
arms
NOTE: The PEL-VBLK can be mounted with the groove
facing forward or to the side.
PEL, MANUAL
PEL-CONV
= 27 lb.
Weight = 40 lb.
Capacity = 175 lb.
= 175 lb.
= 400 lb.
Page 10 of 17