Installation Requirements - Huawei SUN2000 Series Quick Manual

2

Installation Requirements

Angle
Dimensions
3
Installing a Solar Inverter
•
M12x40 bolt assemblies are supplied with the solar inverter. If the bolt length does not meet
the installation requirements, prepare M12 bolt assemblies by yourself and use them
together with the supplied M12 nuts.
•
This quick guide describes how to install a solar inverter on a support. For details about wall-
mounted installation, see the user manual.
• For models used in Australia, install the DC switch locking screw according to local standards.
The DC switch locking screw is delivered with the solar inverter to prevent the solar inverter
from being started by mistake.
• Before installing the mounting bracket, remove the security Torx wrench and set it aside.
Space
2