Table of Contents
Advertisement
Call functions
3. Press <Options> and select End →
Held call to end the call on hold.
4. To end the current call, press [
Using the speakerphone feature
Use the phone as a speakerphone to talk
and listen with the phone a short distance
away.
Press [OK] and then <Yes> to activate the
speakerphone feature. Press [OK] again to
switch back to the earpiece.
Using In-call options
During a call, press <Options> to access
the following options:
•
Speaker on/Normal: turn on the
speakerphone feature or switch back to
Normal mode.
•
Switch to headset/Switch to phone:
switch the call to a Bluetooth headset or
hands-free car kit or back to the phone.
To use this feature, you first need to
connect your headset or car kit to the
phone.
p. 107
32
•
Whisper mode on/Whisper mode off:
turn on or off Whisper mode. Whisper
mode automatically increases the
].
microphone's sensitivity to allow the
other person to hear your voice even
though you may be whispering.
•
Join: set up a multi-party call by adding
a caller on hold to a currently active call.
You can include up to 5 people on a
multi-party call.
•
Split: have a private conversation with
one multi-party call participant. The
other participants can converse with
each other. After the private
conversation, select Join to return both
private participants to the multi-party
call.
•
Swap: switch between calls, if a call is
on hold.
•
Transfer: transfer the currently active
call to a caller on hold. The two callers
can talk to each other, but you are
disconnected from the call.
•
Hold/Retrieve: place a call on hold or
retrieve the call.
Advertisement
Table of Contents
