Table of Contents
Advertisement
5. Select Search new device.
The phone searches for devices within
range and displays a list of available
devices.
6. Select a device.
7. If necessary, enter the Bluetooth PIN
needed for pairing and press <OK>.
Receiving data via Bluetooth
To receive data via Bluetooth, your phone's
Bluetooth feature must be active and its
visibility must be enabled.
1. If an unauthorised Bluetooth device
sends data to your phone, press <Yes>
to allow the device to access your phone.
2. Press <Yes> to receive data.
Network selection
Use this menu to select to either manually
select the network to be used when roaming
outside of your home area, or to let the
network be chosen automatically. You can
select a network other than your home
network only if there is a valid roaming
agreement between the two.
(Menu #.8.2)
Network mode
(Menu #.8.3)
Use this menu to select the network you
use:
•
Automatic: the phone scans for
available networks.
•
GSM 900/1800: the phone operates in
the combined GSM 900/1800 network.
•
GSM 1900: the phone operates in the
GSM 1900 network. This option is only
available in the U.S.A.
•
UMTS: the phone operates in UMTS (3G
network) networks. You can get a higher
speed quality than on lower generation
networks, and use advanced data and
information services, such as video calls.
Preferred networks
Use this menu to add a new network to your
preferred network list, if your USIM/SIM
card supports it.
Adding a network from the network list
1. From the network list, press <Options>
and select Insert or Add → Network
list.
(Menu #.8.4)
109
Advertisement
Table of Contents
