Related Manuals for Arad OCTAVE
Summary of Contents for Arad OCTAVE
- Page 1 I n s t a l l a t i o n M a n u a l A Member of the I ntegrated Metering Technologies...
-
Page 2: Product Liability And Warranty
Period by the Customer after completing a failure report. All provided that written notice of such defect is given by the Customer to Arad within 21 days after discovery thereof. Freight cost to such factory or service center will be paid by the Customer and freight cost from such factory or service center to Customer will be paid by Arad. -
Page 3: Supplied Documentation
• The OCTAVE ultrasonic flow meter is a battery-powered precision flow meter designed for linear, bidirectional flow measurement of water •... -
Page 4: Installation: Location And Position
• Do not lift the Octave by the electronic housing. • Do not carry the Octave by his lid. • Do not place the Octave on the electronic housing. • When handling the Octave, avoid hard blows, jolts or impacts. Installation: Location and Position Proper Installation... - Page 5 The following examples are Arad’s recommendations for achieving top performance Minimum of two (2) pipe Zero (0) pipe diameters before diameters before and after and after elbows (90°) Minimum of two (2) pipe Minimum of five (5) pipe diameters before T connections...
-
Page 6: Pipe Flanges
• In case of direct sunlight exposure, it is recommended to keep the lid closed, though no direct damage will occur with the lid open • Do not expose the OCTAVE to excessive vibration. To avoid vibration, support the pipeline on both side of the meter • Ambient working temperature: -25 to +55°C... -
Page 7: Output Characteristics
1000 mA Module (Analog) mA Outputs diagram 12.2 4-20 4-20 • The current output is a passive 4-20mA. Octave • mA is always “0” (zero) flow and the mA is 12 - 24 [Vdc] 4-20mA factory programmable according to the customer Module requirements.. - Page 8 Output Module Installation 14.0 If your Octave order includes output module, the following will explain how to attach it to the meter. Output module kit includes (Pic.1) 1. Output module 2. 2 Allen Screws 3mm X 20mm 3. O-ring 4. Sealing cap 5.
Need help?
Do you have a question about the OCTAVE and is the answer not in the manual?
Questions and answers