Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for FUXTEC FK-E1SS20
Summary of Contents for FUXTEC FK-E1SS20
-
Page 2: Table Of Contents
Content Introduction and safety………………………………………………….………………………………..3 Intended use……………………………………………………………………………….……….3 General safety instructions for power tools………………………………….……..3 Workplace Safety………………………………………………………………………………..3 Electrical Safety…………………………………………………………………………………..4 Safety of Persons…………………………………………………………………………………4 Use and treatment of the power tool………………………………………………….5 Use and handling of the cordless tool…………………………………………….……6 Safety Instructions for Cordless Reciprocating Saw…………………………….…..6 General Safety Instructions………………………………………………………………...6 Before Use………………………………………………………………………………………7 During Operation…………………………………………………………………………….7 After use………………………………………………………………………………………….7... -
Page 3: Introduction And Safety
Introduction and safety Never allow children or persons unfamiliar with these instructions to use the garden device. Children should be supervised to ensure that they do not play with the appliance. Intended use This device is intended exclusively for sawing materials in the private sector. The appropriate accessories for the respective material are absolutely necessary. -
Page 4: Electrical Safety
Electrical Safety - The plug of the power tool must fit into the socket. The cap must not be changed in any way. Do not use adapter plugs together with grounded power tools. Unchanged plugs and suitable sockets reduce the risk of electric shock. - Avoid physical contact with grounded surfaces such as pipes, heaters, stoves, and refrigerators. -
Page 5: Use And Treatment Of The Power Tool
- Avoid abnormal posture. Make sure you have a secure Stand and keep your balance at all times. This allows you to better control the power tool in unexpected situations. - Wear suitable clothing. Do not wear loose clothing or jewelry. Keep hair, clothing, and gloves away from moving parts. -
Page 6: Use And Handling Of The Cordless Tool
Use and handling of the cordless tool - Charge the batteries only with chargers recommended by the manufacturer. A charger that is suitable for a particular type of battery poses a fire hazard when used with other batteries. - Only use the batteries provided in the power tools. Using other batteries may result in personal injury and fire hazards. -
Page 7: Before Use
Before Use - Familiarize yourself with the device and its functions and controls before starting work. - Check the device for signs of wear or damage before starting up and after a collision. - Do not use a device whose switch is defective and can no longer be switched on or off. - Check that all nuts, bolts, and screws are tight to ensure that the device is operated safely. -
Page 8: Safety Instructions For The Charger
Safety instructions for the charger - Keep the charger away from rain or moisture. The penetration of water into a charger increases the risk of electric shock. - Keep the charger clean. There is a risk of electric shock from soiling. - Check the charger, cable, and plug before each use. -
Page 9: Presentation
- Charge the batteries only with chargers recommended by the manufacturer. A charger that is suitable for a particular type of battery poses a fire hazard when used with other batteries. - The battery can be damaged by pointed objects such as nails or screwdrivers or by an external force. - Page 10 Figure 2: Detailed view saw blade change 1. Saw blade To change the saw blade, turn the lock (fig. 1, point 4) and pull the blade out to the front. To attach a new sheet, rerelease the lock and insert the new blade into the guide rail (fig. 1, item 3). Figure 3: Detailed view of base plate + connection to guide rail The angle of inclination of the footplate can be adjusted forwards or backward as desired and depending on the surface to be sawn.
-
Page 11: Application
Figure 6: Extension or removal of the guide rail To remove the guide rail (point 2) or to extend it forwards, press the safety button on the left side (point 1). Now you can remove the guide rail to the front. -
Page 12: Start/Stop
Do not open the battery - there is a risk of short circuit. Start/Stop Only use original FUXTEC lithium-ion batteries with the voltage indicated on the type plate of your power tool. Using other batteries may cause injury and fire. Hint: Using batteries that are not suitable for the machine may cause malfunction or damage to the power tool. -
Page 13: Tips For The Working Process
Tips for the working process When sawing lightweight construction materials, the legal regulations and the recommendations of the material manufacturer must be followed. Check wood, pressboard, building materials, etc. for foreign objects such as nails, screws, or similar and always use the correct saw blade. Switch the machine on and move it towards the workpiece. -
Page 14: Technical Data
Technical Data Cordless device Nominal voltage 20 V Speed Up to 3,000 (rpm) Max. material diameter Metal 8mm Wood 100mm S1531L HCS (220mm) for wood Supplied saw blade: Optional saw blade: 922EFB1M(130mm) for metal... -
Page 15: Declaration Of Conformity
Gesundheitsanforderungen der oben genannten EG-Richtlinien erfüllt. Any manipulation or change of the machine not being explicity authorized by us in advance renders this document null and void. Storage of the technical documentation: FUXTEC GmbH ● Kappstraße 69 ● 71083 Herrenberg ● Germany, T. Gumprecht, Management Herrenberg, 17.01.2020... - Page 16 Original User Manual FUXTEC 20V Cordless Reciprocating Saw FX- E1SS20...
Need help?
Do you have a question about the FK-E1SS20 and is the answer not in the manual?
Questions and answers