LG DLEY1701 E Series Service Manual page 2

The information in this service guide is intended for use by individuals possessing skill and experience in
electrical, electronic, and mechanical appliance repair. Any attempt to repair a major appliance may result
in personal injury and property damage. The manufacturer or seller cannot be responsible for the
interpretation of this information, nor can it assume any liability in connection with its use.
To avoid personal inju ry, disconnect power before se rvicing this product. If electrical power is required
for diagnosis or test purposes, disconnect the power immediately after pe
To reduce the risk of personal injury, adhere to all industry recommended safety procedures including the
use of long sleeved gloves and safety glasses. Failure to follow all of the safety warnings in this manual
could result in property damage, personal injury or death.
RECONNECT ALL GROUNDING DEVICES
If grounding wires, screws, straps, clips, nuts, or washers used to complete a path to ground are
removed for service, they must be returned to their original position and properly fastened.
Do not try to light a match, or cigarette, or turn on
any gas or electrical appliance.
Do not touch any electrical switches. Do not use
any phone in your building.
Clear the room, building or area of all occupants.
ESD problems are present everywhere. ESD may damage or weaken the electronic control
assembly. The new control assembly may appear to work well after repair is finished,
but failure may occur at a later due to ESD stress.
Use an anti-static wrist strap. Connect wrist strap to green ground connection point or unpainted
metal in the appliance.
Touch your finger repeatedly to a green ground connection point or unpainted metal in the
appliance.
Before removing the part from its package, touch the anti-static bag to a green ground connection
point or unpainted metal in the appliance.
Avoid touching electronic parts or terminal contacts; handle electronic control assembly by edges only.
When repackaging failed electronic control assembly in anti-static bag, observe above instructions.
IMPORTANT SAFETY NOTICE
WARNING !
!
WHAT DO IF YOU SMELL GAS :
IMPORTANT
Electrostatic Discharge (ESD)
Sensitive Electronics
- OR -
rforming the necessa ry checks.
Immediately call your gas supplier from a
neighbor's phone. Follow the gas supplier's
instructions carefully.
If you cannot reach your gas supplier, call the fire
department.
2