CONTROL PANEL ASSEMBLY
W W A A R R N N I I N N G G ! !
When you disassemble the control panel, be
sure to disconnect the dryer from its electrical
supply. Protect your hands and arms from sharp
edges when working. To reduce the risk of injury
to persons, adhere to all industry recommended
safety procedures including the use of long
sleeved gloves and safety glasses. Failure to do
this could lead to a serious injury.
1. Remove 2 screws on the control
panel frame.
2. Disconnect the connectors.
3. Pull the control panel assembly
upward and then forward.
4. Remove 8 screws on the PCB
PCB) assembly, display.
5. Disassemble the control panel
assembly.
44