Settings; Mixer Page - RME Audio MADIface XT User Manual

25.8 Settings

The dialog Settings can be opened via the Options menu or directly via F3.

25.8.1 Mixer Page

On the mixer page some typical settings for the mixer operation are set, like Talkback source,
Dim amount when Talkback is active, the stored main volume or the input used for the External
Input function.
Talkback
Input. Selects the input channel of
the Talkback signal (microphone in
control room). Default: None.
Dim. Amount of attenuation of the
signals routed to the Phones in dB.
Listenback
Input. Selects the input channel of
the Listenback signal (microphone in
recording room). Default: None.
Dim. Amount of attenuation of the
signals routed to the Main Out in dB.
Main Out
Recall. User defined listening volume,
activated by the Recall button at the
unit or in TotalMix.
Dim. Amount of attenuation for the
Main Out in dB.
External Input. Selects the stereo
input that replaces the mix signal on
the Main Out when activated. The
volume of the
adjusted by the slider Gain.
PFL Mode
Live Mode, PFL replaces Solo. PFL means Pre Fader Listening. This feature is very use-
ful when operating TotalMix in a live environment, as it allows to quickly listen/monitor any
of the inputs by hitting the Solo button. The monitoring happens on the output set for the
Cue signal via the Assign dialog.
78
stereo signal is
User's Guide MADIface XT © RME