Clarke CAMTS Quick Start Manual

ADJUSTABLE MACHINE TOOL STAND

INTRODUCTION

Thank you for purchasing this CLARKE Adjustable Machine Tool Stand.
Before attempting to use this product, please read this manual thoroughly and follow the instructions carefully. In doing
so you will ensure the safety of yourself and that of others around you, and you can look forward to your purchase
giving you long and satisfactory service.

GUARANTEE

This product is guaranteed against faulty manufacture for a period of 12 months from the date of purchase. Please
keep your receipt which will be required as proof of purchase.
This guarantee is invalid if the product is found to have been abused or tampered with in any way, or not used for the
purpose for which it was intended.
Faulty goods should be returned to their place of purchase, no product can be returned to us without prior permission.
This guarantee does not effect your statutory rights.

PART IDENTIFICATION

If any parts are missing or damaged, please contact the Clarke dealer where you purchased the tool stand.
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com
MODEL NUMBER: CAMTS
PART NUMBER: 6501610
1
NO DESCRIPTION
1 Legs
2 Foot
3 Shelf
4 Short Shelf Support
5 Long Shelf Support
6 Short Spreader Bar
7 Long Spreader Bar
8 Top Panel
FIXINGS SUPPLIED
Wood Screws
Washers
Bolts
Spring Washers
Nut
QTY
4
4
2
2
2
2
2
2
8
8
24
24
24