Using The Camera On A Trinocular Microscope With Eyepiece Adapter - Swift Swiftcam Series Quick Start Manual

Ⅴ. Using the camera on a trinocular microscope
with eyepiece adapter
1. Install the Swift Imaging 3.0 application program from the CD
included.
2.
Remove the dust cap from the camera and attach the reduction
lens.
Mount your eyepiece adapter to microscope trinocular port and
3.
then attach this assembly above to your microscope's eyepiece
adapter.
(Please note that the eyepiece adapter is specific to your
microscope. Please consult the relevant Microscope Accessory list
and choose an appropriate adapter for your Swiftcam camera).
4. Connect the USB cable onto the camera and then plug it into the
computer.
5.. Please refer to help contents (manual) under software help menu
for the usage of the Swift Imaging 3.0.
- 4 -
Swift Swiftcam Series
Microscope Cameras
Quick Start Guide
- 5 -