Table of Contents
Advertisement
3. Aim the image by aiming the camera lens at the
subject.
•
Press <
> to access camera options.
next section
•
Use the keypad to change camera settings or
switch to other modes.
4. Press
to take a photo. The photo is saved in the
Photos folder.
5. To
use photo options
delete the photo
return to Capture mode
Using camera options in Capture mode
In Capture mode, press <
options:
•
Record video: switch to Record mode.
•
Shooting mode: take a photo in the following
modes:
p. 78
Press
<Options>.
p. 79
<Delete> and then
<Yes>.
[
].
> to access the following
Single shot: take a photo in the normal mode.
You can select whether or not the camera
automatically saves a photo.
Multi shot: take a series of action stills. You can
select the number of photos the camera will take
and the shutter speed.
Mosaic shot: take several stills and save them in
one frame. You can select the layout.
•
Effects: change the colour tone or apply a special
effect.
•
Frames: apply a decorative frame.
•
Timer: set a time delay before the camera takes a
photo.
•
Go to photos: go to the Photos folder.
•
Settings: change the default settings for taking a
photo.
Size: select an image size.
Quality: select an image quality setting.
View finder: select a preview mode, either Full
screen mode or Standard ratio mode with actual
ratio.
77
Advertisement
Table of Contents
