Advertisement
1. (Optional) If you want to use the remote mass storage control feature, use the supplied
USB A to Mini-B cable to connect the USB port on the KVM IP ACCESS Module to a
USB port on the host system
2. (Optional) Connect a modem or RS232 terminal or RS232 to the RS232 serial port
connection
3. Connect an Ethernet cable to the RJ-45 Ethernet port.
Configuration
By default, the KVM IP ACCESS MODULE will try to contact a DHCP server in the subnet to
which it is physically connected. If a DHCP server is found, it will provide a valid IP address,
gateway address and net mask. Before you connect the device to your local subnet, be sure to
complete the corresponding configuration of your DHCP server. It is recommended to configure
a fixed IP assignment to the MAC address of the KVM IP ACCESS MODULE. You can find the
MAC address details on the printed label on the underside of the IP Access module.
KVM IP ACCESS MODULE Setup Tool
Start the setup tool from the CD ROM -
On the upper left corner, the MAC address of the KVM IP ACCESS MODULE is displayed. To
detect the MAC address, press the Refresh Devices button. The displayed MAC address
should correspond to the printed address shown on the label on the base of the IP module.
On the lower right corner of the window, there are two buttons: Query Device and Setup
Device. Press the Query Device button to display the preconfigured values of the network
configuration. The values are displayed in the text fields located above. If necessary, adjust the
network settings to your needs. To save the changes enter a user login and a password (the
default user name is super, the default password is pass) and then press the Setup Device
button.
Logging In
The KVM IP ACCESS MODULE can be entirely managed using a standard web browser. You
can access the KVM IP ACCESS MODULE using the insecure HTTP protocol, or using the
encrypted HTTPS protocol. Whenever possible, use HTTPS.
In order to use the Remote Console window of your managed host system, the browser must
feature Java Runtime Environment version 1.1 or higher support. If the browser has no Java
support (such as on a small handheld device), you can still maintain your remote host system
using the administration forms displayed by the browser itself.
Important: For optimum operation, we recommend you install the latest
version of Sun's Java Virtual Machine 1.5 which can be downloaded from
the following web site:
Launch your web browser. Direct it to the address of your KVM IP ACCESS MODULE.
Example: Type the following in the address line of your browser when establishing an
unsecured connection:
http://<IP address of KVM IP ACCESS MODULE>
When using a secure connection, type in:
https://<IP address of KVM IP ACCESS MODULE>
This will lead you to the KVM IP ACCESS MODULE login page as shown below:
The KVM IP ACCESS MODULE has a built-in super user account that has all the permissions
enabled to administrate your KVM IP ACCESS MODULE switch:
Once logged into the KVM IP ACCESS MODULE successfully, the main page appears.
To launch the Remote Console click on the Console icon –
Page 2
www.java.com
Login name super (factory default)
Password
pass (factory default)
Page 3
Advertisement
