Makita BO6040 Technical Information page 10

W
iring diagram
Model BO6040
Put the lead wires of controller in the lead holder
so that they are not slacken.
Be careful not to loosen the lead wires of field in motor housing.
Put the loosened lead wires in the above place.
Put lead wires of power
supply cord by strain relief
as illustrated in Fig. 25.
Fix lead wires of controller
with lead holder.
Put their slack part in the place
as illustrated in Fig.25.
Speed
Control
Dial
Fig. 24
Fix lead wire of controller with lead holder
between pin A and pin B.
Inflect the lead wire at the terminal
in right angle. See Fig 24A.
Pin B
Pin A
Terminal
Controller
Fig.24A
Do not loosen the lead
wires of filed in motor
housing.
Put the loosened ones in the
place as illustrated
in Fig.25.
Fig. 25
P 10 / 10
Sink plate