Download Print this page

Verify Hardware Installation; Optimize System For Best Performance - ADS Technologies INSTANT DVD 2 User Manual

Ads technologies dvd player user manual

Advertisement

Available languages

Available languages

6. Verify Hardware Installation

Check Device Manager to verify that the USB Instant DVD hardware is
recognized by Windows and is properly installed.
Win98, Win98SE, WinME:
1.) Click Start, Settings, Control Panel.
2.) In Control Panel, click System.
3.) Click Device Manager tab.
4.) Double click the Sound, Video and Game Controllers
5.) Instant DVD should be listed.
WinXP, Win2000:
1.) Click Start, Settings, Control Panel.
2.) In Control Panel, click System.
3.) Click on the Hardware Tab.
3.) Click Device Manager Button.
4.) Double click the Sound, Video and Game Controllers Device
5.) Instant DVD should be listed.
If USB Instant DVD is listed under the Sound, Video and Game Control-
ler Device heading, then the device is properly installed.

7. Optimize System For Best Performance

Optimize System for Best Performance
Set your VGA Resolution
1024 X 768 is the optimal resolution for viewing video at full resolution. DVD
video is captured at 720 x 480 (720 x 576) PAL. If your resolution is not high
enough you will not be able to view the video at full resolution.
1. Right click on your desktop
2. Click Properties
3, Click on Settings Tab
4. Adjust screen area to 1024 X 768 & 16 Bit Color (or higher if your VGA card
and monitor support higher resolutions and bit depth).
Enable DMA to optimize video capture:
Enabling DMA will significantly improve the video capture capabilities of your
system. If DMA is not enabled you will very likely suffer from dropped video
frames.
For Windows 98SE and WinME: Enable DMA on your IDE hard drive for optimal
video capture (Note: Not all hardware supports DMA access).
1. Right click on My Computer
2. Click Properties
3, Click on Device Manager
4. Double click Disk Drives
5. Double click Hard Disk (labeled Generic IDE type XXX)
6. Click the settings tab
7. Enable DMA by checking the DMA box.
8. Click OK
9. Click OK
Your computer will reboot with DMA enabled.
INSTANT DVD 2.0 Page 13

Hide quick links:

Advertisement

loading
Need help?

Need help?

Do you have a question about the INSTANT DVD 2 and is the answer not in the manual?

This manual is also suitable for:

Usbav-702Instant dvd 2.0
Save PDF