Advertisement
9
"Do you want to upgrade software" massage will be displayed as shown in Figure-6.
Press "Left Arrow button" on the remote controller to start the upgrade.
10
The Software upgrading process will begin.
During the Software update the TV set will display "SOFTWARE UPDATING NOW"
as shown in Figure-7:
IMPORTANT:
DO NOT unplug the AC power from the TV or press any buttons on the remote controller or
the TV keypad during this process.
11
Upon completion of the software upgrade, TV will reboot automatically.
12
Remove the "USB drive" from the slot.
13
Please follow the instructions on the screen to setup the TV according to your needs
(including channel setup).
Copyright 2014
Software update (USB)
During software update, TV will not be
available to response any operation for
a few minutes. Continue to proceed ?
Y E S
SOFTWARE UPDATING NOW
PLEASE DO NOT TURN OFF THE TV
UNTIL IT IS 100% FINISHED
Figure-6
Figure-7
All Rights Reserved
NO
30%
Page 3 of 3
Advertisement
