Fixing A No-Boot Issue Caused By Usb-Boot Support - Dell Vostro 5300 Setup And Specifications

The BIOS setup program is displayed.
3. On the left pane, select Settings > System Configuration > USB Configuration.
The USB configuration is displayed on the right pane.
4. Select or clear the Enable External USB Port check box to enable or disable it, respectively.
5. Save the settings and exit.

Fixing a no-boot issue caused by USB-boot support

Sometimes the computer does not boot to the operating system when USB devices are connected to the computer during startup. This
behavior occurs because the computer is looking for bootable files in connected USB devices.
Either disconnect USB devices before booting or follow these steps to fix the no-boot issue.
1. Turn on or restart your computer.
2. Press F2 when the Dell logo is displayed on the screen to enter the BIOS setup program.
NOTE: The F2 prompt indicates that the keyboard is initialized. This prompt can appear very quickly, so you must
watch for it, and then press F2. If you press F2 before the F2 prompt, this keystroke is lost. If you wait too long and
the operating system logo appears, continue to wait until you see the desktop. Then, turn off your computer and try
again.
The BIOS setup program is displayed.
3. On the left pane, select Settings > System Configuration > USB Configuration.
The USB configuration is displayed on the right pane.
4. Clear the Enable Boot Support check box to disable it.
5. Save the settings and exit.
Wireless module
The following table lists the Wireless Local Area Network (WLAN) module specifications of your Vostro 5300.
Table 45. Wireless module specifications
Description
Model number
Transfer rate
Frequency bands supported
Wireless standards
Encryption
Bluetooth
34 Technology and components
Option one
Qualcomm QCA61x4A
(DW1820) (2x2) Wireless
Adapter with Bluetooth 4.2
• 802.11ac - Up to 867 Mbps
• 802.11n - Up to 450 Mbps
• 802.11a/g - Up to 54 Mbps
• 802.11b - Up to 11 Mbps
2.4 GHz (802.11b/g/n) and 5
GHz (802.11a/n/ac)
• 802.11a, 802.11b, 802.11g,
802.11n and 802.11ac
• Dual-mode Bluetooth 4.2,
BLE (HW ready, SW
depends on OS)
• 64-bit/128-bit WEP
• AES-CCMP
• TKIP
Bluetooth 5.0
Option two
Intel Wi-Fi 6 AX201, 2x2,
802.11ax with Bluetooth 5.0
• 2.4 GHz 40M: Up to 574
Mbps
• 5 GHz 80M: Up to 1.2 Gbps
• 5 GHz 160M: Up to 2.4 Gbps
2.4/5 GHz
IEEE 802.11a/b/g/n/ac/ax,
160MHz channel use
• 64/128-bit WEP
• 128-bit AES-CCMP
• TKIP
Bluetooth 5.0
Option three
Intel Wireless-AC 9462, Dualband,
Wi-Fi 802.11ac with Bluetooth 5.0
Up to 433 Mbps
2.4/5 GHz
Wi-Fi 5 (WiFi 802.11ac)
• 64-bit/128-bit WEP
• AES-CCMP
• TKIP
Bluetooth 5.0