Advertisement
CONFIGURATION
Install the SNMP web manager software (available on the product web page at
SnapAV) onto your PC.
Run the program. You'll see the interface below.
In the search box (circled) you can enter a partial or complete IP address to
search for matching devices in the network. By default, the SNMP web manager
has the IP address 192.168.102.230, with a subnet mask 255.255.255.0 and
gateway 192.168.102.1.
Clicking on a specific device allows you to use the program to modify IP address
or apply DHCP mode. You can also change the IP setting, upgrade firmware,
change the password, and adjust static trap address settings using SNMP Web
Manager interface. You must enter the password to accept any modifications (the
default password is 12345678).
Advertisement
