Advertisement
4.3.2 Messages to be displayed
The following table shows a list of popup notification messages this function outputs.
It should be noted that you can edit those messages. For information about how to edit
messages, see "3.1.4 Editing popup notification messages".
No.
1
A case fan failure occurs.
2
A CPU fan failure occurs.
The temperature inside the chassis
3
becomes abnormal.
4
SMART anticipates drive failure.
The value of the drive power-on
5
(=used) hours exceeds the threshold.
6
A RAID error occurs.
Nos. 4, 5, and 6: %1 denotes the drive bay number.
No.4: This includes the case that getting the failure prediction status of the drive fails.
No.6: Supported only by D Model only.
4.3.3 Popup notification settings
This function can be enabled or disabled in the RAS Setup window. In the default factory-
shipped setting, this function is disabled. If this function is disabled, popup messages are not
displayed.
For details, see "3.1.3 Using the RAS Setup window".
Table 4-7 Messages Displayed
Event
4. CHECKING THE HARDWARE STATUS
Popup notification message
Revolutions of fan at case deteriorated remarkably.
Revolutions of CPU fan deteriorated remarkably.
Temperature exceeded prescribed value.
A failure may be imminent on the drive of the drive
bay%1.
Used hours on the drive of the drive bay%1 exceeded
prescribed value.
RAID status is DEGRADE. (Drive bay%1)
4-13
Advertisement
