Cooperation With Additional Feeder; Information; Manual Control; Menu Favorite - Pellas X S.Control TOUCH Operation And Installation Manual

Calibration
Fill the silo to the level which corresponds to
full level of fuel, then set value of parameter:
Boiler settings → Fuel level → Calibration
of fuel level → fuel level 100%
In main window the indicator will be set on
100%. The calibration process is marked
with a pulsating fuel level indicator. The
indicator will pulsate until programming point
referring to minimum fuel level. Decreasing
level of fuel in the silo should be monitored
constantly. When fuel level reaches expected
minimum, parameter value should be set this
way:
Boiler settings → Fuel level → Calibration
of fuel level → Fuel level 0%
8.21 COOPERATION WITH
ADDITIONAL FEEDER
After connecting additional B module the
controller can cooperate with low fuel level
sensor in silo. After activating sensor , for
Additional feeder working time controller will
connect auxiliary feeder to refill basic fuel
level. This parameter can be found in:
Service settings → Burner settings →
Others
8.22

INFORMATION

Menu information enables view to measured
temperatures and allows to check which of
devices are currently activated.
After connecting
module
about auxiliary
displayed.
8.23

MANUAL CONTROL

In the controller it is possible to manually
activate devices like i.e. pumps, feeder
engine, or blower engine. It enables to check
if the device is operating correctly and if it is
connected properly.
Attention: Entering manual control
is possible only in STAND-BY mode,
when boiler is switched off
extension
of mixers information
mixers
Pic. 7 Manual control window view, when OFF – means
that the device is off, ON – activated
Long
feeder or other device may cause
danger.
8.24

MENU FAVORITE

In menu, on a lower stripe of the screen
there is a button:
selection fast choice menu appears. Parts in
this menu are added by pressing for a while
the right icon in a round menu.
To delete selected position from favorites
menu it is needed to press it for a longer
while and accept its removal.
are
17
lasting activating
. After its
of fan,