1. Manuals
  2. Brands
  3. Precision Digital Corporation Manuals
  4. Network Hardware
  5. PDW30
  6. Quick start manual

Precision Digital Corporation PDW30 Quick Start Manual

Point-to-point wireless bridge
Hide thumbs Also See for PDW30:
1
2
3
4
5
6

Advertisement

Table of Contents

PDW30
Point-To-Point Wireless Bridge
FEATURES
•
Signal Wire Replacement in a Rugged,
Industrial Housing
•
Inputs and Outputs on Both Field Units
•
Simple to Order, Configure, & Install
•
1 Mile Line-of-Sight Outdoor, 500 Feet
Indoor Range
•
Inputs: Analog (4-20 mA, 0-10 V, 0-5 V, 1-5 V),
Digital, and RS-485 Modbus
Communications
PRECISION DIGITAL CORPORATION
•
•
•
•
•
®
•
WIRELESS
WIRELESS SYSTEM
Outputs: Analog (4-20 mA), Digital, and
RS-485 Modbus
Communications
®
Remote or Attached Antenna
Repeaters and Directional Antennas
Available
Flanges for Wall or Pipe Mounting
Software Available for Even Easier Setup
NEMA 4X, IP68 Enclosure
www.predig.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PDW30 and is the answer not in the manual?

Questions and answers

Related Manuals for Precision Digital Corporation PDW30

Summary of Contents for Precision Digital Corporation PDW30

  • Page 1 Indoor Range Flanges for Wall or Pipe Mounting • • Inputs: Analog (4-20 mA, 0-10 V, 0-5 V, 1-5 V), Software Available for Even Easier Setup Digital, and RS-485 Modbus ® • NEMA 4X, IP68 Enclosure Communications www.predig.com PRECISION DIGITAL CORPORATION...

  • Page 2: Key Features

    NEMA 4X painted aluminum enclosure and is a smart, economical choice when you need two devices to communicate over long The PDW30 is simple to order, simple to configure, and easy to distances in a harsh industrial environment. It eliminates the trust with your application.
  • Page 3 RS-485 Modbus outputs. PDW Manager Software for Even Easier Setup The PDW30 is designed to be easy to setup, with just a few button pushes. However, the PDW Manager allows you to program the PDW30 wireless units from a PC with a USB connection. Units connect to a PC via the micro USB connection on their face, underneath the enclosure cover.
  • Page 4 Yagi Antenna N Connector Fitting* Coax Seal Tape* *Included with the PDA3120-N or PDA3140-N Extension Cable Caution: Do not use accessive force when attaching coupler to PDW30 wireless module. Mounting the Yagi Antenna U-Bolt Mast Tighten to 6-8 ft /lbs...

  • Page 5: Specifications

    PDW30 Point-To-Point Wireless Bridge SPECIFICATIONS Analog Input Inputs: Field selectable: 4-20 mA, 0-10 V, 0-5 V, 1-5 V Except where noted all specifications apply to operation at +25°C. Accuracy: ±0.03% of calibrated span ±1 count General Temperature Drift: 0.005% of calibrated span/°C max from 0 to 65°C ambient, 0.01% of calibrated span/°C max from -40 to 0°C...

  • Page 6: Ordering Information

    APPLICATION EXAMPLE (1) Antenna Coupler (1) Cable Gland This simple example demonstrates how the PDW30 may be used (1) 8" Length of Coax Seal Tape to wirelessly bridge an analog signal. Because the PDW30 can (1) ½" NPT Cable Gland input and output a 4-20 mA signal, it is ideal for integration into existing 4-20 mA systems.

This manual is also suitable for:

Pdw30-sna

Table of Contents