1. Manuals
  2. Brands
  3. Precision Digital Corporation Manuals
  4. Wireless Access Point
  5. PDW30
  6. Installation manual

Precision Digital Corporation PDW30 Installation Manual

Point-to-point wireless bridge
Hide thumbs Also See for PDW30:
1
2
3
4
5
6
7
8
Table of Contents

Advertisement

Quick Links

Download this manual
PDW30 Point-to-Point Wireless Bridge
Thank you for your purchase of the
PDW30 Point-to-Point Wireless Bridge.
This installation guide will briefly de-
scribe some common setup procedures
and best practices for this device.
This guide includes:
Important Information...........................
Available Accessories..........................
Wireless Installation.............................
Troubleshooting Guide.........................
Contact Precision Digital......................
Additional information about the PDW30
Wireless Bridge can be found in the
instruction manual included on the CD
or available at
www.predig.com.
WIRELESS
© 2017 Precision Digital Corporation.
.
All rights reserved
Installation Guide
2
2
3
4
5
7
8
Programming buttons are located
under the enclosure glass. They can be
accessed by removing the enclosure
cover.
Tel. (508) 655-7300 www.predig.com
Menu Button - Access Programming
Mode and to return to Run Mode.
Enter Button - Access a menu or
accept an option in Programming
Mode.
Previous Button - Return to a previ-
ous menu in Programming Mode or
Run Mode. Increment selected digit
during numeric input.
Display/Next Button - Advance to
the next menu or select next digit
in Programming Mode. Display the
current analog and digital input
values in Run Mode.
233 South Street
Hopkinton MA 01748-2208 USA

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PDW30 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Precision Digital Corporation PDW30

Summary of Contents for Precision Digital Corporation PDW30

  • Page 1 Troubleshooting Guide......current analog and digital input Contact Precision Digital...... values in Run Mode. Additional information about the PDW30 Programming buttons are located Wireless Bridge can be found in the under the enclosure glass. They can be instruction manual included on the CD...
  • Page 2 Available Accessories Optional accessories for the PDW30 include solutions for long distance wireless transmis- sion, convenient mounting kits, and wireless surveying tools. Directional Antennae Antenna Extension Cables High gain directional antennae allow the PDW30...
  • Page 3 PDW30 Point-to-Point Wireless Bridge Installation Guide Basic Wiring of Wireless Units In order to wire the wireless units, it is necessary to unscrew their covers and remove their electronics modules. Screw terminals are located on the reverse side of the electronics modules.
  • Page 4 Installation Guide Wireless Installation The diagram below shows a typical PDW30 installation. A transmitter is outputting an ana- log signal to the primary wireless unit. The analog signal is being wirelessly broadcasted to the secondary unit which then sends a 4-20 mA signal to the destination device. This guide will show you how to configure this type of installation.
  • Page 5 PDW30 Point-to-Point Wireless Bridge Installation Guide Programming the Wireless Units It is necessary to program a few settings on each device in order for them to work with your particular system. Follow the instructions below on the primary and secondary wireless units to get up and running.
  • Page 6 PDW30 Point-to-Point Wireless Bridge Installation Guide Setting a Password Both the primary and secondary wireless units may be protected with a four digit numeric password in order to prevent unauthorized tampering. When a password has been set, you will be prompted to enter that password in order to access the device menu.
  • Page 7 • If communicating over distance of miles, consider installing high gain directional antenna. • If there are multiple PDW30 wireless Multiple wireless de- vices in the area with systems, verify that each pair has its own the same ID.
  • Page 8 PDW30 Point-to-Point Wireless Bridge Installation Guide Symptom Possible Cause Corrective Action • Check to make sure the digital connection Digital inputs are not Devices have mis- corresponding with digital matched input/output is programmed appropriately as either an outputs. settings. input or an output as described in steps 3 &...

Table of Contents