Advertisement
16
EN
WARNING!
WARNING!
coastal areas and other harsh environments, such as the warm, highly humid atmosphere around pools
and hot tubs. These stains could be perceived as rust, but can be easily removed or prevented. To provide
required with fresh water and/or stainless steel cleaner.
maintenance will remain dark and legible. To clean the panel, use only warm soapy water or stainless steel
cleaner available from your Napoleon dealer. Never apply abrasive cleaners on any stainless surfaces,
WARNING!
WARNING!
surface corrosion to occur. This can be removed with a brass wire brush. Inspect the burner at least
annually for cracks, insect nests, excessive corrosion or any other damage. If the burner is damaged, it
CAUTION!
signs that may indicate a problem are:
•
Strong or unusual odor coming from the appliance.
•
•
•
•
Excessive soot building up on the glass embers.
To clean the inside of the burner, it must be removed from the appliance: Remove the glass embers and
examine the burner. If dirty, clean with a wire brush.
are easier to clean if the burner is removed from the appliance, but it can also be done with the burner
installed.
www.napoleongrills.com
: The control panel text is printed directly on the stainless steel and with proper
: While washing your appliance, be sure to keep the area around the burner
: The burner is made from stainless steel, but extreme heat and a corrosive environment can cause
N415-0390 MAY 09.18
Advertisement
