Subscribe to Our Youtube Channel
Related Manuals for ZyXEL Communications SP-200E
Summary of Contents for ZyXEL Communications SP-200E
- Page 1 SP-200E Statement Printer User’s Guide Version 1.00 7/2006 Edition 1 Copyright © 2006 ZyXEL Communications Corporation. All rights reserved.
-
Page 2: Front Panel
1 Introducing the SP-200E The SP-200E is a 2-inch thermal printer with an integrated, easy-to-use, push-button control panel. It lets you generate subscriber accounts and print account information with the push of a button. It is also compact and portable and does not need a computer or printer. It is ideal for offices, coffee shops, libraries, hotels and airport terminals that provide Internet access for customers. -
Page 3: Rear Panel
PS/2 keypad port Connect an optional PS/2 keypad to this port. Refer to the hotspot gateway User’s Guide for information on how to configure the gateway for use with the SP-200E and the optional PS/ 2 keypad. SP-200E User’s Start Guide... -
Page 4: Front Panel Push-Buttons
Push a button to create a customer account with the configured account service period. Refer to the gateway User’s Guide for information on how to configure the gateway for use with the SP-200E. No function. 2 Open the cover. -
Page 5: Web Configurator: Login
3 Set a paper roll in the printer so that it unrolls from the bottom. 4 Web Configurator The web configurator allows you to change the SP-200E’s IP address or encryption key. You should also change the SP-200E’s password. Web Configurator Follow the steps below to access and use the web configurator. - Page 6 • Click Firmware Upgrade if you want to upload firmware (see section 4.3). Note: The SP-200E automatically logs you out if there is no activity for longer than five minutes after you log in. If this happens, simply log back in again.
-
Page 7: Firmware Upload
4.3 Firmware Upload To upgrade the firmware, you first have to download the latest firmware from use the web configurator to upload it to the SP-200E. The firmware will include the device name (SP- 200E) and end with a .bin extension. -
Page 8: Specifications
Apply to start the file transfer process. The firmware must be a binary file and should have a .bin extension. Note: WARNING! Do not close the browser or disconnect or turn off the SP-200E, as interrupting the file upload process may PERMANENTLY damage the device. - Page 9 Operating Temperature Storage Temperature Operational Humidity Storage Humidity Certification SP-200E User’s Start Guide 58(+0/-1) mm 48 mm 50 m max. A single account statement is around 15 cm in length. You should be able to print about 333 account statements on a 50 m paper roll.
-
Page 10: Troubleshooting
• Do NOT use the device if the power adaptor or cord is damaged as it might cause electrocution. • If the power adaptor or cord is damaged, remove it from the power outlet. SP-200E User’s Start Guide... - Page 11 SP-200E User’s Start Guide • Never disassemble the printer or the adapter. • Do NOT attempt to repair the power adaptor or cord. Contact your local vendor to order a new one. • Do not use the device outside, and make sure all the connections are indoors. There is a remote risk of electric shock from lightning.
Need help?
Do you have a question about the SP-200E and is the answer not in the manual?
Questions and answers