Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for ICON STAGE
Summary of Contents for ICON STAGE
- Page 1 STAGE USER MANUAL KEEP THIS MANUAL FOR FUTURE NEEDS...
-
Page 2: Table Of Contents
DEVICE DMX START ADDRESS SELECTION ………………………………………………………. 12 DISPLAY ……………………………………………………………………………………………………. 12 Address ……………………………………………………………………………………………………. 15 Config ……………………………………………………………………………………………………… 15 Reset Function ……………………………………………………………………………………………. 17 Communication……………………………………………………………………………………………. 17 Info………………………………………………………………………………………………………….. 18 Test…………………………………………………………………………………………………………. 20 10. DMX PROTOCOL………………………………………………………………………………………….. 21 11. ERROR MESSAGES………………………………………………………………………………………. 27 12. CLEANING AND MAINTENANCE……………………………………………………………………….. 30 ICON STAGE USER MANUAL... -
Page 3: Safety Instructions
And it is normal. If you are concerned, please contact your distributor. 10) Do not focus the beam onto flammable surfaces. The minimum distance between the exiting ICON STAGE USER MANUAL... -
Page 4: General Guidelines
Furthermore, any other wrong operations may lead to short-circuits, burns, electric shocks etc. ICON STAGE USER MANUAL... -
Page 5: Features
Power the unit. Press & hold button until the display shows “No Movement Reset”. 8) SOFTWARE Upgrades：fast and convenient through DMX cable Reset DMX address, remote lamp switch, reset can all be done by the controller ICON STAGE USER MANUAL... - Page 6 Running time of fixture on display for reference 9) OTHER SPEC Input signal isolation: guarantees stable signal transmission without interference Advanced RDM function 10) WEIGHT Net weight：31 kg 11) PHOTOMETRIC DATA ICON STAGE USER MANUAL...
-
Page 7: Fixture Overview
4） Mode/Esc-button 5） Left-button 6） Down-button 7） ENTER-button 8） Right-button 9） Up-button 10） Pan Lock 11） RJ45 in 12） RJ45 out 13） DMX out 14） DMX in 15） Power in 16） Power out 17） Fuse 18） Handle ICON STAGE USER MANUAL... -
Page 8: Dimensional Drawings
4. DIMENSIONAL DRAWINGS ICON STAGE USER MANUAL... -
Page 9: Installation Instructions
If you lack these qualifications, do not attempt the rigging of this device yourself. Improper installation/ rigging can result in serious bodily injury. Before rigging make sure that the installation area can hold a minimum point load of 10 times the device’s weight. ICON STAGE USER MANUAL... -
Page 10: Rigging Using The Omega Bracket
4) Pull the safety cable through the holes on the bottom of the base and over the trussing system or another suitable rigging point. Insert the end into the carabiner and tighten the safety screw. Important: This step is very important to ensure safe rigging of the fixture. ICON STAGE USER MANUAL... -
Page 11: Rigging Drawings
If you lack these qualifications, do not attempt the rigging of this device yourself. Improper installation/ rigging can result in serious bodily injury. ICON STAGE USER MANUAL... -
Page 12: Dmx-512 Control Connection
The DMX terminator is an XLR plug with a 120 Ω resistor connected between pins 2 and 3, which is then plugged into the output (female) XLR socket of the last fixture in the chain. Please see illustrations below. ICON STAGE USER MANUAL... -
Page 13: Device Dmx Start Address Selection
1 minute, then the display will switch off automatically. The Display does not need external power to operate. Hold down the -button for 3 seconds and the Display will be turned on by the built-in battery. ICON STAGE USER MANUAL... - Page 14 Comm Loss Fade out 30 seconds Default Fade out 60 seconds Software Version X.X.X…… ARTNET ARTNET XXX. XXX. XXX. XXX XXX. XXX. XXX. XXX Info Need Password Cross Load SW Default Total Run Time XXXX (Hours) ICON STAGE USER MANUAL...
- Page 15 … Self Test Movement Titl Pan XXX Individual Function Titl Titl XXX … … Test Pan, Manual Control Tilt, …… Password Need Password Calibrate TILT Color Wheel …… Clean Focus Clean Prism Cleaning Mode Clean Zoom ICON STAGE USER MANUAL...
-
Page 16: Address
“Pan and Tilt”. Press <ENTER>，the display will show “Pan and Tilt”. 2) Press <Up/Down>，the display will show “Tilt Reverse”. 3) Press< ENTER>，the display will show“Tilt Reverse”. 4) The display show “OFF”，Press <Up/Down>，the display will show “ON”. ICON STAGE USER MANUAL... - Page 17 2) Tap the <Up/Down>button until “Dimmer Curve” is displayed. 3) Press <ENTER>，the display will show“Dimmer Curve”. 4) The display show “Standard”，Press <Up/Down>，the display will show “Standard”，“Stage”， “TV”，“Architectural”，“Theatre”. 5) Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu.
-
Page 18: Reset Function
5) Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu. 9.4.2 DMX Info 1) Tap<MODE/ESC>button ， access the main menu ， Tap the <Up/Down>button until “Communication” is displayed. Press <ENTER>，the display will show “Communication”. ICON STAGE USER MANUAL... -
Page 19: Info
With this function，you can display the running time of the device. The display shows “XXXX”， “XXXX”stands for the number of hours. 1) Tap <MODE/ESC>button，access the main menu，Tap the <Up/Down>button until “Info” is displayed. Press <ENTER>，the display will show “Info”. 2) Press <Up/Down>，the display will show “Total run Time”. ICON STAGE USER MANUAL... - Page 20 4) The display will show “Head2UFan1= xxxx RPM”，“Head2UFan2= xxxx RPM”，“……”. 5) Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu. 9.5.9 Error Info With this function，you can display the error informatin. The selection have Error Record 1，Error ICON STAGE USER MANUAL...
-
Page 21: Test
2) Press <Up/Down>，the display will show “Cleaning Mode”. 3) Press< ENTER>，the display will show “Cleaning Mode”. 4) The display show “Clean Focus”，“Clean Prism”，“Clean Zoom”. 5) Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu. ICON STAGE USER MANUAL... -
Page 22: Dmx Protocol
Magenta (0-white, 255-100% magenta) Magenta Color Fine : 0-255 Magenta Fine Yellow Color : 0-255 Yellow (0-white, 255-100% Yellow) Yellow Color Fine : 0-255 Yellow Fine CTO Color : 0-255 CTO (0-white, 255-100% CTO) CTO Color Fine : ICON STAGE USER MANUAL... - Page 23 Clock-wise rotation from fast to slow 190-193 No rotation 194-255 Counter clock-wise rotation from slow to fast Rotating gobo indexing Fine 0-255 Fine indexing Fixed Gobos : (Gobo Scroll ON in the menu or Control channel) Open ICON STAGE USER MANUAL...
- Page 24 Clock-wise scroll from fast to slow 188-195 No rotation 196-255 Counter clock-wise scroll from slow to fast Iris: 0-255 Max. diameter to Min. diameter Iris Fine: 0-255 Iris Fine Prism: 0-63 Open position (hole) 64-127 Prism ICON STAGE USER MANUAL...
- Page 25 No function (shutter open) 192-223 Random strobe effect slow to fast 224-255 No function (shutter open) Dimmer intensity: 0-255 Intensity 0 to 100% Fine Dimmer intensity: 0-255 Dimmer intensity fine Dim Modes 0-20 Standard 21-40 Stage 41-60 61-80 Architectural ICON STAGE USER MANUAL...
- Page 26 Open to Close Fine 0-255 Blade 4 B Right Blade Rotation 0-255 Blade 4 B Fine Right Blade Rotation Fine 0-255 All Blade Rotation All Blade Rotation 0-255 All Blade Rotation Fine All Blade Rotation Fine 0-255 Focus Timing ICON STAGE USER MANUAL...
- Page 27 40~59 Gobo Scroll ON 60~79 Gobo Scroll OFF 80~99 All motor reset 100~119 Pan/TILT reset 120-139 other motor reset Refresh Rate（LED）（default 1.2KHz) 140~200 900Hz~1500Hz（+10Hz/+1 value ） 2.5KHz 4KHz 5KHz 10KHz 15KHz 20KHz 25KHz 208-255 No function ICON STAGE USER MANUAL...
-
Page 28: Error Messages
(or its driving IC on the main PCB). The Fix Gobo - movement is not located in the default position after the reset. Animation wheel Er (Animation wheel_ error) This message will appear after the reset of the fixture if the head’s ICON STAGE USER MANUAL... - Page 29 (sensor failed or magnet missing) or the stepper motor is defective (or its driving IC on the main PCB). The Blade 2 - movement is not located in the default position after the reset. ICON STAGE USER MANUAL...
- Page 30 (sensor failed or magnet missing) or the stepper motor is defective (or its driving IC on the main PCB). The Blade Rotation - movement is not located in the default position after the reset. ICON STAGE USER MANUAL...
-
Page 31: Cleaning And Maintenance
We recommend frequent cleaning of the device. Please use a moist，lint- free cloth. Never use alcohol or solvents. Please refer to the instructions under “Installation instructions”. Should you need any spare parts，please order genuine parts from your local dealer. ICON STAGE USER MANUAL...
Need help?
Do you have a question about the STAGE and is the answer not in the manual?
Questions and answers