Table of Contents
Advertisement
Troubleshooting
Problem
Adjust the "Bass" and "Treble".
Poor sound
If receiving a poor signal in "Stereo / t·u", switch to "Mono".
Adjust the channel reception using "Manual".
No sound from the
Audio signals received from EXT-5 and EXT-6 cannot be sent
audio component
to the "AUDIO OUT" terminal.
Wrong screen size
Switch "Size" in "HDMI Setting" to "1" or "2".
No picture, no sound
Use the cable marked with HDMI logo.
Check if the device is compliant with HDMI.
Switch "Audio" in "HDMI Setting" to "Digital" or "Auto" for
No sound
HDMI devices, or "Analogue" or "Auto" for DVI devices.
(Not available for "EXT-6".)
Green and distorted
Wait a little for the signal to stabilize when switching the
screen
signal format for an "HDMI" device.
Some functions do not
It is not a malfunction. Some functions (dark background) in
work
the menu do not work depending on the situation.
"EXT-3", "EXT-5", "EXT-6" inputs and PC mode cannot be
Some inputs cannot
selected in the sub-picture.
be selected in the
RGB input signal of "EXT-1" and "EXT-2" are not available in
sub-picture
dual-picture mode.
(continued)
Actions
page
18
18
10
–
18
–
–
18
–
–
–
Problem
Is the "T-V LINK" compatible device connected to "EXT-2"?
Is the SCART cable "Fully Wired"?
"Feature Not Available"
Is the "T-V LINK" compatible device turned on?
appears
After confirming all the conditions above, press "OK" button
again.
Press 2 to start "ACI" again.
"ACI Error" appears
If you still receive the "ACI Error" after numerous tries, press
3 to cancel "ACI".
Keep the TV off for a while and then turn the power on again.
The LAMP indicator
If the TV goes into warning mode, unplug the TV after the
blinks rapidly
cooling has completed and consult your retailer. (It may be a
malfunction of the internal electrical circuits.)
Keep the TV off for a while and then turn the power on again.
The power lamp and
If the TV goes into warning mode, unplug the TV after the
LAMP indicator blink
cooling has completed and consult your retailer. (The inside
alternately
temperature rises abnormally or the fan may be blocked.)
If this condition occurs soon after replacing the lamp, reinstall
the new lamp unit. (The lamp unit may not be inserted into the
lamp housing correctly.)
Repeat the lamp installation steps, taking care to observe all
warnings.
The power lamp and
- Make sure the lamp sits flat inside the housing area.
LAMP indicator blink
- Make sure the lamp cover is reinstalled.
rapidly simultaneously
If this condition occurs except for replacing the lamp, keep
the TV off for a while and then turn the power on again. If the
TV goes into warning mode, unplug the TV after the cooling
has completed and consult your retailer. (It may be a lamp
malfunction.)
Actions
page
22
–
–
–
–
–
4
–
21
Advertisement
Table of Contents
