Stalgast 9745110 Maintenance Manual page 30

3. Adjust the minimum flow in the control valve - by tightening or loosening the screw located next to
the knob on the gas valve.
•
Remove the knob from the gas valve to get to the bypass (sometimes it is necessary to dismantle the
panel)
•
Screw in the appropriate by-pass in accordance with Table 4.1
By - pass
4. Adjust the gas flow on the pilot burner - replace the pilot nozzle according to table 4.1; after unscre-
wing screw 4 in accordance with table 4.1
Adjustable sleeve position
Pilot
- 30 -
Gas valve