Vanin RX4-1500 Quick Start Manual

Quick Start Guide
RX4-1500
V A N I N
Wi-Fi 6 Router
Packing List
Juplink RX4-1500 Router
Ethernet cable AC-DC Adapter Quick Start Guide
Step 2： Internet setting and wireless setting
① Connect to the wireless Network name shown
on the back of the router ( you can change the
network name and password later )
WLAN
Juplink RX4-1500
Start a web browser on the device connected
②
to the router. Enter 192.168.0.1 in the address
bar and press enter.
http://192.168.0.1
Username:admin / Password :admin
③
Welcome to use Juplink Router
Please input usename/password to login
admin
username
password
admin
Login Cancel
Other Wireless Modes Setting- AP Mode Setting
Before Installation Please complete the following settings
① Connect a computer to the Juplink AP router and
launch a web browser.
② Visit http://192.168.0.1 ， you are prompted to enter
a username and password. The home page displays：
Security App Manage Help
Status Network
Network LAN 2.4G Setting 5G Setting SNTP WiFi Sync Guest SSID
IP Address:
192.168.0.1
Subnet Mask:
255.255.255.0
Enable DHCP Server
Start IP Address:
192.168.0.2
End IP Address:
192.168.0.254
Subnet Mask:
255.255.255.0
Apply
Front Panel LED Status Indicators
Green LED Indicator
Ports/ Buttons
WPS/RST
LAN 1, 2,3,4
WAN Port
WPS
POWER
Reset
POWER ON/OFF
LAN4 LAN3 LAN2 LAN1 WAN
Step 1: Basic Installation
①
Modem
AC Wall
Modem
LAN out
Internet
① Turn on the modem that is providing your internet connection, then let it register with your ISP.
② Use the included power adapter to connect the router to a power source. The LED indicator lights solid on.
③ Connect the WAN port of the router to a LAN port of your modem or to an Ethernet port.
④ When The LED indicator lights solid on connect your device to the router.
Step 3：2.4G Network Setting
① Select Network then select 2.4G setting.
② Customize your WiFi Name and WiFi Password, and
click Apply button.
Network Security App Manage Help
Status
Network LAN 2.4G Setting 5G Setting SNTP WiFi Sync Guest SSID
Wireless Basic Configuration
Noted this page allows you to set the wireless net
work name (SSID) and password
Enable Wireless
Juplink_RX4-1500
SSID
WPA-PSK/WPA2-PSK
Authentication Mode
WPA-PSK/WPA2-PSK Authentication is recommended
Encryption AES
Wireless Pre-shared Key *******
③ The router will reboot and you can reconnect with
new wireless network name ( SSID ) and new
password after 10 seconds.
③ Select Network and click LAN
④ Manually set IP address as the following format：
192.168.0.XXX ( XXX is any number of 2~254)
⑤ Turn off DHCP function and click Apply button,
setting finished.
Note: If the default login credentials do not work, you
might have changed the admin password. If you cannot
remember your new password, you must perform a
factory reset to restore the router to its factory default
settings. For more information, see Restoring a Juplink
Cancel
home router to the factory default settings.
FCC ID:2AT9Z-RX4-1500
LED indicator Status
The router is starting or successfully
Solid on
connected to the internet.
Fast blinking The router is performing WPS negotiation.
Description
Used to start the WPS negotiation process of the router, or
to reset the router
They are LAN ports used to connect to the wired device
such as computers or switches
Used to connect this router to the internet
Used to connect to the included power adapter
② ③
AC-DC power
WPS
cord
Reset
LAN4 LAN3 LAN2 LAN1 WAN POWER ON/OFF
Ethernet WAN IN
Step 4： 5 G Network Setting
① Select Network then select 5 G setting.
② Customize your WiFi Name and WiFi Password, and
click Apply button.
Network
Status
Network LAN 2.4G Setting 5G Setting
Wireless Basic Configuration
Noted this page allows you to set the wireless net
work name (SSID) and password
Enable Wireless
SSID
Authentication Mode
WPA-PSK/WPA2-PSK Authentication is recommended
Encryption
Wireless Pre-shared Key *******
Apply Cancel
③ The router will reboot and you can reconnect with
new wireless network name ( SSID ) and new
password after 10 seconds.
AP mode Installation
Modem - LAN
AC- WAN
WPS
Reset
LAN1 LAN2 LAN3 LAN4 WAN
AC1- LAN AC2- LAN
AP 1
AP- WAN
WPS
Reset
POWER ON/OFF
LAN1 LAN2 LAN3 LAN4 WAN
Before Setting
To customize your wireless network
connection and other advanced router
Description
settings, please go to this website to
download RX4-1500 User Guide for
more information.
www.Juplink.com/Support/
Operating Conditions
Working Temperature: 0~40°C / 32~104°F
Working Humidity: 10%~90% RH
(No condensation)
Storage Temperature:-10~70°C / 14~158°F
Storage Humidity: 5%~95% RH
(No condensation)
④
Front Panel LED
GREEN
WPS Pairing
① Click the WPS connect on your device
Security App Manage Help
SNTP WiFi Sync Guest SSID
② Press the WPS button for 3 seconds, the LED
indicator blinking and enable the WPS-supported
device within 2 minute to establish a WPS connection
Juplink_RX4-1500 5G
the LED indicator solid on.
WPA-PSK/WPA2-PSK
AES
Apply Cancel
Back of your router view
① Connect your Modem out to your AC router WAN Port
Modem
AC
② Connect your AP router WAN Port to your AC router LAN Port
POWER ON/OFF
AP 2
Nanjing Juplink Intelligent Technologies Co., Ltd.
Address : No. 757 Dixiu Road, Binjiang Economic
Development Zone, Jiangning District, Nanjing
Technical support available by: Support@juplink.com
AP- WAN
Website: www.juplink.com
WPS Made in China
Reset
LAN1 LAN2 LAN3 LAN4 WAN POWER ON/OFF
RX4-1500
WPS Connect
Device WLAN connection page
WPS
Reset