Preset Searches - Humminbird SmartStrike Map Card Accessory Manual

Preset Searches

SmartStrike Preset Searches include preselected search settings based on water depth and underwater structure. The search
criteria is pre-selected, however, it can be customized before you execute the search.
The available Preset Searches will vary based on the selected lake. For example, if you select a lake where the deepest water is 25
feet, the deep water Preset Searches may not be available. Preset Searches that are unavailable will be grayed out in the menu.
Preset Search Menu Options
See the table below for the available Preset Search options. See Execute a Preset Search for instructions on how to select and
execute a Preset Search.
NOTE: The availability of Preset Searches will vary based on the currently selected lake.
Preset Search Depth Categories
Shallow
(approximately 0 - 15 feet
[0 - 4.6 meters])
Mid-Depth
(approximately 16 - 30 feet
[4.9 - 9.1 meters])
Deep
(approximately 31- 45 feet
[9.4 - 13.7 meters])
Other
Structure: Search for fish-attracting structure on the lake bottom, such as points,
humps, wrecks, timber, rocks, creek beds, and drop-offs.
Spots on Spots: Search for structure on top of geographical variations on the lake
bottom. For example, rocks or timber on a ledge, lip, or drop off.
Feeding Shelves/Flats: Search for underwater shelves or flats.
NOTE: The search criteria is pre-selected, however, it can be customized before you
execute the search.
Search for drop-offs or other structure at specific depths, such as deep weedline depth
or thermocline depth. The search criteria is pre-selected, however, it can be customized
before you execute the search.
The available options may vary based on the currently selected lake.
17
Preset Search Menu Options
SmartStrike Preset Searches