HOME NETWERKS 7130-06-BT Manual page 8

ASSEMBLY INSTRUCTIONS
2. Measure the opening to assure it is largeenough to accommo-
date the new fanhousing (9.4 in. x 9.4 in.).
3. If this fan is not replacing an old fan be sureto cut a
9.4 in. x 9.4 in. opening for the fan housing.
4. Insert suspension bracket onto fan housing using suspension
bracket I (C) and II (D). If spacing between joists is 21.5 in. to
23.5 in. attach suspension bracket III (E).
5. Position fan housing so edge of fan is flush with sheetrock.
Do not flush mount housingwith joist.
6. Secure the fan housing to joist with suspension brackets using
(AA) (included). (Joist spacing of less than 21.25 in.)
2
3
4
E
5
6
8
C
D
www.homewerksww.com