Advertisement
Introduction
1 –
Thank you for choosing this PRODIPE product.
Safety Precautions
To ensure both your safety and the trouble-free operation of this product, please
read the safety precautions carefully. These are located at the back of the box.
Important: to reduce the risks of electric shock, do not remove the panel from the
rear of this product. For any maintenance issues, please contact your dealer or a
qualified technician.
At high volume, this equipment is liable to produce a level of sound that may cause
permanent damage to your hearing.
Connections
2 –
To ensure that your amp performs as intended, please observe the following procedure:
1. Check the audio cords.
2. Lower ALL the levels, including the master controls, on the built-in mixing console.
3. Check the power cord and the mains switch.
4. Power up the Prodipe Natural6 amp by flicking the switch at the rear of the amp to ON (1).
The green POWER LED on the mixing console will light up (2).
Note that: when powering down your equipment, turn off the Prodipe amp first by flicking the
switch at the rear of the amp to OFF (1). The POWER LED on the mixing console will go out
(2).
(1) Switch ON/OFF (rear)
Illustrations et photos non contractuelles
Actual product(s) may differ from illustrations/photographs used
Copyright © 2016 IPE Music/Prodipe
(2) POWER light (top)
Page 4
Advertisement
