Table of Contents
Advertisement
Available languages
Available languages
Owner's manual
LEANING AND MAINTENANCE
•
Make sure to disconnect the device from power supply socket prior to cleaning.
•
Clean this device with soft, slightly damp cloth. Do not use any abrasives or
chemical agents to clean this product.
•
Empty the wastebasket regularly. Otherwise, the cutting head may jam due to
overfilling.
Note! Make sure to set the Mode switch to OFF position before emptying
the wastebasket.
•
If necessary, use a suitable tool to remove jammed paper from the cutting
head.
CAUTION!
•
Make sure to unplug the device from power supply socket before manual
removing jammed paper from the cutters.
•
The cutters in the cutting head are sharp! Exercise caution and do not reach
directly into the cutters to avoid injuries!
SPECIFICATIONS
•
Suitable for: home/small office, office
•
Can shred: paper, CDs, DVDs, credit cards, staples
•
Shreds per single pass (A4 80 g/m2): 7 sheets
•
Cut type: strip-cut
•
Cut size: 7 mm
•
DIN security level: P-1, T-1, O-1
•
Paper entry width: 220 mm
•
Wastebasket capacity: 13 l
•
Shredding speed: 2,5 m/min
•
Automatic start/stop function
•
Reverse function
•
Removable head for easy emptying
•
Two separate cutters and wastebaskets for paper and CDs, DVDs, credit cards
•
Protection against overloading
•
Noise level: 74 dB
•
Power: 140 W
•
Power supply: 220 – 240 V; 50/60 Hz
•
Dimensions: 285 x 330 x 172 mm
•
Weight: 2,1 kg
14
EN
Advertisement
Table of Contents
