Screen Configuration; Summary; Layout Of Operation Screen - Nikon T-RCP Instructions Manual

Screen Configuration

5

(1) Summary

Note:
If power is turned ON while the MODE key is held down, the MAINTENANCE MENU screen will appear.

(2) Layout of OPERATION Screen

Objective lens
information
P. 15
Filter block information
Dia-Illumination
lamp voltage
Note:
If the electric components are not connected to the HUB controller, information for the unconnected
components will not appear.
5 Screen Configuration
Power ON
Ｔ－ＲＣＰ ＲＥＭＯＴＥ ＣＯＮＴＲＯＬ ＰＡＤ
Ｖ１．００
Is MODE key
pressed?
No
P. 17
P. 29
Introduction
ＭＡＩＮＴＥＮＡＮＣＥ ＭＥＮＵ
１．Ｖｅｒｓｉｏｎ
２．ＴＥＳＴ１
３．ＴＥＳＴ２
Yes
４．ＰＡＤ Ｄａｔａ
５．ＨＵＢ Ｄａｔａ
６．Ｃｏｎｔｒｏｌ Ｄａｔａ
ａ．Ａｌｌ Ｃｏｎｔｒｏｌ Ｄａｔａ
ｂ．Ｒｅｖｏｉｖｉｎｇ Ｎｏｓｅｐｉｅｃｅ
ｃ．Ｃｏｎｄｅｎｓｅｒ Ｃａｓｓｅｔｔｅ
ｄ．Ｌｉｇｈｔ Ｐａｔｈ
ｅ．Ｆｉｌｔｅｒ Ｂｌｏｃｋ
ｆ．Ｅｘｃｉｔｅｒ Ｆｉｌｔｅｒ
ｇ．Ｂａｒｒｉｅｒ Ｆｉｌｔｅｒ
ｈ．ＡＵＸ Ｆｉｌｔｅｒ
MODE key
Ｏｂｊｅｃｔｉｖｅ
MODE key
Ｃｏｎｄｅｎｓｅｒ
Ｆｉｌｔｅｒ
Ｅｘｃｉｔｅｒ
Ｂａｒｒｉｅｒ
Ｃｏｍｂｉｎａｔｉｏｎ（Ｏｂｊ．＞Ｃｏｎｄｅｎｓｅｒ）
MODE key
Ｃｏｍｂｉｎａｔｉｏｎ（Ｆｉｌｔｅｒ＞ＥＸ／ＢＡ）
Ｍｏｒｅ
- 8 -
ＳＥＴＴＩＮＧ ＭＥＮＵ
Condenser module
information
P. 16
Excitation filter
information
P. 18
Barrier filter
information
P. 19
Z-axis position
P. 23