Download Print this page

iBasso PB2 Owner's Manual page 2

Balanced headphone amp

Advertisement

iBasso
Balanced Headphone Amp PB2
is on trickle charge mode. After 2 more hours, the battery
will be fully charged. PB2 has overcharge protection; you
can leave the amp plugged and no over-charging concerns.
Warranty:
iBasso PB2 (excluding accessories and battery pack) to be
free from malfunctions and defects in both materials and
workmanship for
one year
Buyer should retain the warranty card. The warranty card
will be required with any request for warranty repair.
This warranty does not apply when failure is due to,
accident
alteration,
water infiltration,
unauthorized service, misuse, abuse, use with incompatible
accessories or attachments, failure to follow operations, or
claim made after the duration of this warranty.
For further product and warranty information, please go to
www.iBasso.com
.
Specifications:
Power Source: Built-in 12.6V Li-Polymer Battery Pack, or
16V External Power Supply
Frequency Response: 10Hz~150 KHz -0.5dB
Signal to Noise Ratio:-115dB
Output power:Up to 2500mW+2500mW into 32Ω
Gain: +6dB/ +12dB/ +20dB (Balanced Output)
0/ +6dB/ + 10dB (Single End Output)
Battery Life: >20 Hours
Battery Charge Time: 4 Hours
Recommended Headphone Impedance: 8~600
Case dimension: 2.2W
x
55W
x
Weight: 168g or 5.9oz
from the date of purchase.
modification,
3.9L
x
0.95H (inch)
1001L
x
24H (mm)
1
Owner's manual

Advertisement

loading