Cardinal SB500 Series Installation Manual page 22

SETUP AND CONFIGURATION, CONT.
LED B (SP= on Remote Display)
SUPPRESS LEADING ZEROS
The 7-segment LED (U15) and the scoreboard will show the current value. If the setting
displayed is acceptable, press the MODE switch to save it and advance to the next
setup parameter. Otherwise, using the (+) switch to increase the value or the (−) switch
to decrease the value, select the new setting and then press the MODE switch to save it
and advance to the next setup parameter. Values of 0 or 1 may be selected
0 = No suppression (DEFAULT)
LED A AND B (SD= on Remote Display)
SUPPRESS DECIMAL POINT AT LOCATION 0 (ZERO)
The 7-segment LED (U15) and the scoreboard will show the current value. If the setting
displayed is acceptable, press the MODE switch to save it and advance to the next
setup parameter. Otherwise, using the (+) switch to increase the value or the (−) switch
to decrease the value, select the new setting and then press the MODE switch to save it
and advance to the next setup parameter. Values of 0 or 1 may be selected
0 = Allows a decimal point after the least significant digit of weight
1 = Prevents a decimal point from displaying to the right of the least significant
byte of weight (DEFAULT)
LED A, B AND 1 (SA= on Remote Display)
SUPPRESS THE ANNUNCIATOR INFORMATION (lb, kg, T, t, G, N)
The 7-segment LED (U15) and the scoreboard will show the current value. If the setting
displayed is acceptable, press the MODE switch to save it and advance to the next
setup parameter. Otherwise, using the (+) switch to increase the value or the (−) switch
to decrease the value, select the new setting and then press the MODE switch to save it
and advance to the next setup parameter. Values of 0 or 1 may be selected
0 = No suppression. The annunciator information is displayed (DEFAULT)
1 = Suppress the annunciator display
18
1 = Suppress zeros
3601-M418-O1 Rev N • SB500 Series