1.2 The Front Panel LEDs
The PWR LED turns on when you connect the power. The SYS LED blinks while performing system testing
and then stays on if the testing is successful. The CON/AUX, LAN, WAN and WLAN LEDs turn on if they
are properly connected. Refer to the following table for detailed LED descriptions.
LED
COLOR
PWR
Green
SYS
Green
Red
ZyWALL 30W
STATUS
On
The ZyWALL is turned on.
Off
The ZyWALL is turned off.
Off
The ZyWALL is not ready or failed.
On
The ZyWALL is ready and running.
Flashing
The ZyWALL is rebooting.
On
The power to the ZyWALL is too low.
3
MEANING