Advertisement
J) CLEANING
(Cleaning the rice cooker after unplugging and allowed it to be cool off)
When cleaning the rice cooker, do not use
polished powder, nylon brush, benzene and
others. Please assemble the lid after
cleaning.
INNER POT, INNER LID
Clean the rice scoop and inner pot with a
sponge.
(Rice Scoop)
( Inner Pot)
Caution
Do not wash roughly when washing the inner
pot and inner lid
When the lid has become cool, take down and
open the steam vent to clean it.
INNER POT
Replace the inner pot if distorted or dented at the appointed service centre.
To protect the non-stick coated surface of the inner pot:
Use the supplied rice scoop.
Do not use the pot to wash kitchen utensils.
Do not use vinegar.
11
RICE COOKER BODY
TOP LID
Wipe with clean cloth.
HEATING PLATE, SENSOR
Use a damp cloth to remove the object
stuck to the sensor and heating plate.
Heating plate
Sensor
Inner pot always uses water and steam that
might leave stains. However, it is not
harmful to our health.
D) DIASSEMBLE OF INNER LID AND STEAM CAP
Inner lid disassemble
Inner lid assemble
Hold the
handle
Please insert the convex part of inner lid (superior side) into the locker on the outer lid
Raise it after pressing
and push it.
Please make sure insert the convex part of inner lid (inferior side) into the inside of
Pull the lid towards you
convex part lid (place 2).
Lift up the steam cap
Disassemble
Turn counter clockwise and pull.
Disassemble the steam cap from
the body by pulling upwards
Insert the steam cap in the hole
for assembly
Timer [This clock displays time in a 24hours format;
12 o'clock midnight is set as 0:00, 12 o'clock noon is set as 12:00]
For example: Please set up the time 1:10 (that is to say , display 13:10)
Press H
button
more than 2 seconds
Press
H M
button
to adjust time
KEEP
Press
button
WARM
CANCEL
to complete the adjustment
Cautions to user
Timer was unable to adjust if the power cord not connected.
In the process of cooking, keep warm & presetting, timer are unable to adjust.
Please press OFF button to finish timer adjustment when the timer display is blinking and the timer
does not work.
Insert and push inside
Installation of inner lid (inside)
Convex part of inner lid
Insert ( inferior side)
Convex part of inner lid
Convex part of lid
Close
Match the steam cap position and turn it in
the direction of the arrow until you hear a
clicking sound
Top lid of
steam cap
Cover of
Cover of
steam cap
steam cap
at this moment, the timer start
blinking
at this moment, the timer keep
blinking.
It is able to adjust the time
quickly if continue pressing this
button.
the timer will start after the
timer adjustment finish.
4
Advertisement
