Page 2
REMOVING THE SKIN AND VEINS 1. Remove the two thumb screws that hold the hand on the stand. (See Figure 7.) 2. Remove the old skin by cutting it with a pair of sharp scissors. Start at the wrist and cut up to the end of the middle finger.
Page 3
Figure 6 Figure 7 REPLACING THE HAND SKIN 1. Pour a portion of the lubricant into the skin, allowing the lubricant to run down the sides (pour only enough lubricant into the skin to completely coat the inside surface). 2. Squeeze the skin between your hands. Work your hands back and forth, up and down the skin to coat the inside of the skin thoroughly with the lubricant.
Page 4
Other Available Simulators LF00698U Adult Injectable Arm (Light) LF00958U Pediatric Injectable Arm LF00995U Arterial Puncture Arm LF01121U Advanced IV Arm LF01131U Venipuncture and Injection Arm LF01139U Advanced IV Hand LF00698U LF00995U LF01121U ONLINE: NascoHealthcare.com EMAIL: lifeform@enasco.com PHONE: 1.800.431.4310 HEALTHCARE ADDRESS: 901 Janesville Ave.