Sony SU-WL500 Installation Manual page 15

2
Remove the screws from the
rear of the monitor.
FW-85BZ35F/FW-75BZ35F/FW-65BZ35F/
FW-55BZ35F
FW-49BZ35F/FW-43BZ35F
Note
Be sure to store the removed screws in a safe place,
keeping them away from children. When attaching
the stands to the monitor again, be sure to install the
stored screws back in the original position.
3
Referring to the Screw and Hook
locations diagram/table on
page 21, determine the screw
positions, and secure the
Mounting Hook to the rear of the
monitor.
 Secure the Mounting Hook to the rear of the
monitor temporarily, using the four screws
(*1).
 Be sure that both screws are securely
tightened with equal torque strength to the
rear of the monitor.
FW-85BZ35F/FW-75BZ35F/FW-65BZ35F/FW-55BZ35F
1
Screw *
Mounting Hook
1
Screw *
Mounting Hook
FW-49BZ35F/FW-43BZ35F
1
* Screws (+PSW6 × 25) (not supplied)
2
* Needs 5 spacers (not supplied).
2
*
10 mm
15
(GB)