Natural Bed Company Orchid Four Poster Bed Assembly Instructions

Single (.90x1.90)

Download this manual

Natural Bed Company

Orchid Four Poster Bed Assembly Instructions

Items included in bed flat pack are:

1 x headboard

1 x footboard

4 x extension posts

4 x canopy beams

2 x side rails

1 x set of sprung beech slats

1 x set of double sprung beech slats with sliders

1 x set of plastic end caps (2 per slat)

Fixings:

8x threaded bolts

4x nuts

8x wooden dowels

4x bronze bolts

1. Place the wooden dowels in the outer holes at the ends of the side rails, tap

these in securely. (See images below)

2. Screw the four threaded bolts into the middle holes of the legs of the

headboard and footboard panels. (See images below)

168-170 Devonshire Street, Sheffield, S3 7SG. T: 0114 272 1984

counter@naturalbedcompany.co.uk

Single (.90x1.90)

View the Orchid on our website

4x half-moon washers

1x spanner

1x hexagon key for bronze bolts

www.naturalbedcompany.co.uk

Page 1 Natural Bed Company Orchid Four Poster Bed Assembly Instructions Single (.90x1.90) View the Orchid on our website Items included in bed flat pack are: 1 x headboard 1 x footboard 4 x extension posts 4 x canopy beams 2 x side rails...
Page 2 Natural Bed Company 3. Attach the side rails to the footboard legs (see images on the previous page), then loosely secure using the half-moon washer and the nut with the spanner provided (see image below). In the same way attach the side rails to the headboard to create a full bed frame.
Page 3 – see image below. Slats 4-9 will be double slats, the others are standard single slats (see image below). We hope you enjoy your Natural Bed Company Bed! 168-170 Devonshire Street, Sheffield, S3 7SG. T: 0114 272 1984 counter@naturalbedcompany.co.uk...