Natural Bed Company Oregon Superking Size Assembly Instructions

Download this manual

Natural Bed Company

Oregon Wooden Bed Assembly Instructions

View the Oregon on our website

Items included in bed flat pack are:

1 x headboard panel

1 x headboard rail (the headboard rail has more holes than the footboard rail)

1 x footboard rail

2 x side rails

1 x centre rail (not included if you have ordered a single bed)

1 x set of sprung beech slats

1 x set of double sprung beech slats with sliders

1 x set of plastic end caps (2 per slat)

Fixings:

4x threaded bolts

4x nuts

8x wooden dowels

4x dome-headed bolts

1. Screw the four threaded bolts into the side rails (See images below)

2. Insert the wooden dowels into the headboard and footboard rails, tap these

in securely. (See images below)

3. Bring the sections together, then secure using the half-moon washer and the

nut with the spanner provided (see images below). NB: the images below are

of the underside of the bed frame. You can tighten the bolts as shown by

168-170 Devonshire Street, Sheffield, S3 7SG. T: 0114 272 1984

counter@naturalbedcompany.co.uk

Superking Size (1.80x2.00m)

4x half-moon washers

1x spanner

1x 5mm hexagon key

www.naturalbedcompany.co.uk

Page 1 Natural Bed Company Oregon Wooden Bed Assembly Instructions Superking Size (1.80x2.00m) View the Oregon on our website Items included in bed flat pack are: 1 x headboard panel 1 x headboard rail (the headboard rail has more holes than the footboard rail)
Page 2 Natural Bed Company lying on the floor or, if there are two of you, you may find it easier to turn the bed upside-down for this procedure (in this case please ensure you have something on the floor to protect the bed frame) 4.
Page 3 (as shown above). For a softer/more flexible feel move the sliders towards the centre of the slats (towards the top of the curve of the slats). We hope you enjoy your Natural Bed Company Bed! 168-170 Devonshire Street, Sheffield, S3 7SG. T: 0114 272 1984 counter@naturalbedcompany.co.uk...