Samsung Q800T Series E-Manual page 11

Using the Tap View
By tapping the mobile device on your TV, you can watch
This function may not be supported depending on the model.
This function is available in Samsung mobile devices with Android 8.1 or higher.
1. Enable Tap View on your mobile device.
For more information about configuration, refer to 'Enabling the Tap View' below for how to set.
2. Turn on the screen of your mobile device.
3. Tap your mobile device on the TV. The TV screen switches to
When you perform Tap View in
device's screen appears on the TV.
4. Watch Multi View
The displayed TV screen may differ depending on the model.
This function enables mirroring (Smart View) by detecting vibrations generated when you tap the mobile device on the TV.
Be sure to tap away from the TV screen and bezel corners. It may scratch or break the TV or mobile device screen.
We recommend using your mobile device with the cover in place and lightly tap it on any external edge of the TV.
Enabling the Tap View
Enable Tap View in the SmartThings app.
Depending on the SmartThings app version, you may need to register the TV with your mobile device.
Launch the SmartThings app on your mobile device.
1.
2. Select Settings (
3. When any mobile device is near the TV, set "Allow phone presence detection" to On.
Tap "Allow phone presence detection" and then set the "Remote Smart View" to On.
4.
Enter the "Remote Smart View" by tapping, and then set the TV to connect from the device list to On.
5.
Upon connection for the first time, select
Ambient Mode
or mobile device's screen on the TV screen.
) in SmartThings app on your mobile device.
Multi View or mobile device's screen through the TV screen.
Multi View
feature or Art mode (only in The Frame models), only the mobile
Allow on a pop-up window of the TV.
- 11 -
or mobile device's screen.