Related Manuals for MOBILUS MOTOR COSMO Series
Summary of Contents for MOBILUS MOTOR COSMO Series
- Page 1 THE COSMO|L REMOTE CONTROL MOBILUS MOTOR Spółka z o.o. ul. Miętowa 37, 61-680 Poznań, PL tel. +48 61 825 81 11, fax +48 61 825 80 52 VAT NO. PL9721078008 www.mobilus.pl...
- Page 2 CAUTION! Each programming and changing of the motor rotation direction is confirmed by the half turns of its drive. This is why, the control cannot be programmed when a shutter is in its limit position – upper or lower. Then, it can be damaged ( e.g. drawn into the housing ). PROGRAMMING MODE Connect the power supply.
- Page 3 CAUTION! If it is the first remote control loaded into the receiver, this is the MASTER remote control and the motor will change to the operating mode. Using the MASTER remote control, it is now possible to operate the motor or program other remote controls. No channel will be loaded by the motor if the remote control sends signals for several channels simultaneously.
- Page 4 The drive will do two half turns and the operation direction will be changed. SELECTING THE CHANNEL Channels are selected by means of the buttons located on the front panel of the remote control. After pressing a button, it is illuminated and the radio channel is enabled. Channels can be chosen freely.
- Page 5 5. After pressing any of the selection buttons in the operating mode, the button is enabled or disabled (depending on the previous state). Depending on the next action, point 3 or 4 is applicable. NOTE! After putting the remote control into the frame, there is no access to the STOP button.
- Page 6 ENVIRONMENTAL PROTECTION The device was marked according to the WEEE Directive (2002/96/EC) on waste of electrical and electronic equipment. Ensuring its proper disposal, you reduce the risk of harmful effect of the product on the environment and human health which could appear in the case of improper disposal of the device.
Need help?
Do you have a question about the COSMO Series and is the answer not in the manual?
Questions and answers