Image Menu Functions
Auto Image
The projector automatically adjusts tracking, signal synchroniza-
tion and vertical and horizontal position for most computers. If
you want to adjust these features manually, you must turn off
first by highlighting Auto Image in the Image menu
Auto Image
and clicking either mouse button to select "off".
Auto Resize
automatically resizes the image by scaling it up or
Auto Resize
down.
When
is on, the projector makes the best fit of the
Auto Resize
image to the screen. If you turn
either cropped or too small for the screen.
Manual Sync
The projector adjusts signal synchronization automatically for
most computers. But if the projected computer image looks fuzzy
or streaked, try turning
image still looks bad, try adjusting the signal synchronization
manually as described below.
1 Turn
Auto Image
2 Press the left or right mouse buttons repeatedly until the
image is sharp and free of streaks.
Auto Resize
off then back on again. If the
Auto Image
off.
F
IGURE
Image menu
off, the image may be
23
NOTE: Some screen savers inter-
fere with the operation of Auto
Image. If you're experiencing prob-
lems, try turning your screen saver
off, then turning Auto Image off
and back on.
29