Table of Contents
Advertisement
audio cable
mouse cable
Connecting the CablePro audio and mouse cables to a laptop computer
If your computer has a USB connector and is running Windows 98,
use the USB cable
1 Plug the
mouse connector on your computer.
2 Plug the
end of the CablePro mouse cable into the
connector on the CablePro.
You must have the appropriate USB drivers installed on you
computer to use the USB feature. Windows 98 ships with the
appropriate drivers.
Now you're ready to power up the projector and your laptop.
Skip to "Powering up the Projector and Adjusting the Image" on
page 15.
end of the CablePro mouse cable into the
F
7
IGURE
NOTE: The USB mouse is sup-
ported for use with Windows 98
only.
NOTE: A USB mouse is hot-plug-
gable, meaning you do not need to
re-boot your computer after con-
necting the mouse to use it. A PS-2
mouse is not hot-pluggable.
9
Advertisement
Table of Contents
Troubleshooting
