HISAKA UX-005A Manual

Introduction
About this document
 In addition to this document, the Manuals for HISAKA PHEs consist of the following six documents. Read them thoroughly and
understand the precautions regarding the safety of the equipment and its functions before handling the equipment.
1 Installation Manual, 2 Operation and Maintenance Manual, 3 Gasketting Manual, 4 Plate Cleaning Manual,
6 Mixed Gasket Materials Manual, 7 Strainer Maintenance Manual.
You
can also download these documents on our company website.
 This document is the operation and maintenance manual for "Slit-in" type plates of plate heat exchangers (PHE) to which gaskets
are installed without adhesives. Refer to the separate operation and maintenance manual for food product PHE
(FX-A Series).
 This document is created for a person who fully understands the language it is written in. If a person, who is not able to understand
the language written herein, will handle the equipment, please provide safety instructions to the personnel/operators.
 The PHE supplied may differ from the drawings and pictures in this document depending on the optional parts if any. Also, for the
purpose of explanation, the drawings and pictures in this document may omit the details, accessories, or the like.
 Changing the contents of this document, in part or in whole, or using this document for anything other than its intended purpose is prohibited.
About gasket use
 To prevent injury and damages, do not use the gaskets other than for their intended purpose and specifications. Also, during
maintenance, follow the instructions of related documents.
About worker limitations
 PHE maintenance should be carried out by a worker who has received training in safety and danger prevention.
 Work in high places should be carried out by a worker who fully understands the danger of the work and has received training in
safety and danger prevention.
Export Regulations on the Equipment
 In case of export of HISAKA PHE and its component parts such as plate, gasket and so on, please follow the local law and
regulations.
Disposal of the Equipment
 Do not incinerate gaskets. Incinerating gaskets releases toxic gas and is extremely dangerous.
 Any unnecessary gasket should be disposed as industrial waste in accordance with international, national, prefectural, and
municipal regulations.
Disclaimer
 HISAKA accepts no liability for any failures in the function or performance of the equipment caused by use of any other than
genuine parts.
 HISAKA accepts no liability for any injuries or damage borne by the user, caused by use of any other than genuine parts.
 HISAKA accepts no liability for any failures in the function or performance of the equipment caused by use of this equipment in a
manner that does not adhere to the procedures indicated in this manual.
5 "Slit-In" Type Gasketting Manual
http://www.hisaka.co.jp/english/
Plate Heat Exchanger